8 Port Gigabit Switch with 7 PoE port
OVERVIEW
The ZQ-POESG-8-7 Power Source Convenient switch combines an small-high efficiency 8-port 10/100 /1000Mbps switch with 7 PoE port.
The ZQ-POESG-8-7 PoE switch use an external 18VDC to 57VDC power adaptor. All 7 PoE Ethernet ports can provide 30W power as well as 10/100/1000M data transmission over standard readily available Cat 5e/6 cables.The ZQ-POESG-8-7 PoE t allow for data and power to be transmitted over a single Ethernet twisted-pair cable to the attached devices.
The ZQ-POESG-8-7 switches is Power Source Equipment (PSE) and fully compatible with Powered Devices (PD) that comply with the passivet PoE standard, allowing users to attach any PoE compliant device such as wireless Access Points (APS), VOIP phone, IP camera, printer and Network Attached Storage (NAS) to the PoE Switch without requiring additional power.
On a network. The unit is designed with home and small business users in mind and is a cost effective solution for environments where AC power is not available or too costly to install.
FEATURES
*8 switch ports with 10/100/1000Mbs auto detect operation with status LED
* Available power supply options
18 volts, 24 volts, 48 volts 56 volts
30 watts, 60 watts, 120 watts
100 to 240 volt AC input, 50 or 60 Hz high efficiency
*7 always on PoE outputs with either Mode A and/or Mode B
Mode A power and data on pins 12 (-) and 36 (+)
Mode B power or pins 45 (+) and 78 (-) with
data on pins 12 ,36,45 and78
* Dual PTC fuses on each PoE output port
One 650 ma fuse per port for Mode A
One 650 ma fuse per port for Mode B
*18 volt to 56 volt operation
* Function switch on/off Mode A/B
* Power supply inputs
2.1mm power connectors, center positive
Mode A input with LED status
Mode B input with LED status
LED indicates 18/24 volt operation or 48/56 volt operation
Maximum input current per mode – 2.5 amps
Mode B PoE power input from the uplink port – 1 amps max
* Dual Power supply operation
Redundancy - 48v 802.3af only – see text
Load balancing – 48v 802.3af only – see text
Mixed voltage – Mode A at 48v and Mode B at 24v – see text
* Uplink port 10/100/1000 Mbs
No PoE voltage out
Auto detect 568 A or 568 B connections
*802.3af emulation ( always on, no autonegotiation)
48 volt in either A or B modes
*Mikrotik, OpenMesh, Ubiquiti passive PoE
24 volt in mode B
SPECIFICATIONS
Input 100-240V AC 50/60Hz
Output 18 to 56 V (650ma max per port)
Data 1/2&3/6&4/5&7/8
Power 12/36(Mode A) 45/78(Mode B)
Data In Connects PC/HUB/Switch
Weight 0.85Kg
Ethernet Cable TIA/EIA 568 Cat. 5/6
Data rate 10/100/1000Mbps
Connector RJ-45
Operating Temperature 0°C ~ 40°C
Storage Temperature -40°C~+70°C
Operating Humidity 10%~80%RH
Storage Humidity 5%~90%RH
Certification CE & FCC
Case of material metal work material
Dimensions 192mm×82mm×27mm
HOW TO ORDER
ZQ-POES-8-7 PoE Switch 10/100Mbps MODE A&B
ZQ-POEGS-8-7 PoE Switch 10/100/1000Mbps MODE A&B
OTHER
1'U 2x7 port PoE Switch
2pcs of poe switch with rack mount
Application:
VoIP/IP Phone Systems
Wireless Access Point (WiFi AP)
WiMAX Basestation
IP Survellance Camera
Network Security Cameras
Door Security
POS
Netbook/mini Notebook
RFID Reader
SIP IP Paging
Gateway
Building/Access Control
The poe switch does not include the power supply.
The power supply is sold seperately. such as 24v 60w, 24v 120w, 48v 60w, 48v 120w, 56v 60w and 56v 120w etc.
SKYPE ID: denglang888
